|
Features
- Available for PAL, NTSC and Dual Standard PAL/NTSC.
- Genlock SPG locks to Composite Colour Signal or Colour Black.
- Three encoded outputs plus YPrPb and YC outputs.
- RGB and YPrPb inputs.
- On-board Colour Bar Generator.
- Optional built-in Linear or Hard Keyer.
- Key Delay to co-time Key and Encoded Output Signals.
BROADCAST VIDEO ENCODER
- The VIP120 is one of the most versatile broadcast specification
PAL/NTSC encoders available today. It has been designed to meet the most demanding
system requirements with a very comprehensive range of facilities, all housed in
a compact 19" 1U frame. The fully modular construction allows customised
versions of the unit to be produced for particular applications.
- The encoder is available in PAL or NTSC versions, and can also be supplied as
dual standard PAL/NTSC. The unit will accept both RGB and YPrPb inputs and, in
addition to the three encoded outputs, also provides both YC and YPrPb outputs -
facilities which could allow significant saving in converters or component
transcoders in a typical installation.
- The built-in SPG will lock to a composite colour signal or coulour black.
With no reference input, it will free run whilst maintaining the SCH
relationship. A generous horizontal phasing range and continuously variable
sub-carrier phase means that system timing can be greatly simplified.
- Other standard facilities include an integral colour bar generator and a key
signal delay. The key delay allows co-timing of key and encoded output signals,
which together with pulse outputs of mixed sync and mixed blanking, acter for
the installation of equipment such as character generators and computer graphics
workstations.
- A very significant feature of the VIP120 is the option to include a built in
linear or hard keyer - the VIP
820 Broadcast Encoder/Keyer. This, again, makes the encoder ideal for use
with character generators or similar equipment.
Specifications
|
- H Phase ±5µs (continuously variable)
- S/C Phase >360° (continuously variable)
- Non Linearity < 1%
- LF Tilt < 1% (at 50Hz)
- Residual Subcarrier (synchronous) < ½%
- U/V PAL, I/Q NTSC
|
| OPTIONAL KEYER |
- Luminance and Chrominance gain inequality < 1%
- K rating < 1%
- Differential Gain < 1%
- Differential Phase < 1°
- Timing (either input by any route) < 1°
|
| VIDEO INPUTS |
- (looping high impedence)
- Red - 700mV
- Green - 700mV
- Blue - 700mV
- Pr - 700mV
- Y - 1V
- Pb - 700mV
- Pb - 700mV
- (terminated into 75 ohms)
|
| OUTPUTS |
- (terminated into 75 ohms)
- 3off Encoded Composite - 1V
- 1offPr - 700mV
- 1off Y - 1V
- 1off Pb - 700mV
- 1off S-VHS Y - 1V
- 1off S-VHS C - 300mV Burst
- 1off Delayed Key - 700mV
- 1off Mixed Sync - 2V
- 1off Mixed Sync - 2V
|
| POWER |
- 98-125V or 198-250V (12VA nominal)
|
| MECHANICAL |
- CASE
- Width 19" rack mounting
- Height 1U (44mm)
- Depth 410mm including rear connectors
- Weight
- 5 Kg (packed)
|
| OPTIONAL KEYER FACILITIES |
- A & B Video inputs.
- External or Internal Key.
- Mix to Key.
- Cut from A to Mix Key.
- 2off Preview outputs.
- 2off Transmission outputs.
|
| CONNECTOR TYPES |
- Video and Pulse BNC
- Control D-9
- Power (mating supplied) IEC
|
Specification subject to change without notice.
Back to the top
Shootview Ltd. 87
Cadbury Road, Sunbury
on Thames Middlesex.
TW16 7LS England.
Telephone:
+44 (0) 1932 782823 Fax:
+44 (0) 1932 772824 E-mail:
Sales@Shootview.com
For
directions to Shootview Click here. For
Product Listing Click here.
For web development /
design please
contact H via email hsr1234@aol.com.
|
