tags: transmissionBack to Catalogue
SDI Digital Logo Store & Key - BUGTRAP
Features
- Up to 8 logos can be stored in non-volatile memory
- Logo key & fill capture from SDI
- Full 10bit SDI operation for broadcast quality
- Backup change over functionality
- LED indicators for close monitoring
Overview
This new device from Shootview is for channel branding in the digital domain. The Shootview BugTrap is a new digital logo store and keyer which can store up to eight logos that can be cut in and out with GPI's. The logos can be of any size up to a quarter of the picture width.
Logos and their key signal are grabbed into non-volatile memory via the SDI input. Once stored, the logo is keyed, by a linear keyer, over the programme signal.
The BugTrap has one programme input, a buffered loop through and two outputs. One of which has a relay bypass to the program input allowing the signal to pass through the unit in event of power failure.
BugTrap is housed is a very compact case measuring only 104mm x 104mm x 27mm and is powered from an AC adaptor.
Specifications
Inputs | 1 off SDI 75 ohm, 1 off Reference 75 ohm |
Outputs | 2 off SDI 75 ohm (one via relay bypass) |
TV Standard | 625 / 525 |
Connections | Video BNC, GPIs D9, Power IEC |
Power | 98 - 250V |
Dimensions | 1U rack mount 430mm deep or Baysaver |